Please take a moment to fill out this form so that we can assess exactly what your application requires. If you wish, an applications engineer will contact you to further discuss your needs.

Send Me Your Products Catalog

Send Information Via
Mail
E-Mail
Fax

Have A Representative Contact Me

Components

Enter The Components To Be Measured Along With Their Maximum PPM Values

Process Conditions

Stream Pressure
Pounds per Square Inch (PSI) Kilopascal (kPa)
Average Minimum Maximum

Stream Temperature
Celsius Fahrenheit
Average Minimum Maximum

Length of Sampling Line
Feet Meters

Number of Sample Points
Distances From Analyzer

Analyzer Enclosure (e.g.. NEMA 12...)

Amount of Liquid in Sample (%)

Analyzer Specifications

Model
Model 10 Single Channel Total Hydrocarbon, Spot Heated Analyzer Model 10/2 Dual Channel Total Hydrocarbon, Spot Heated Analyzer Model 20 Single Channel Total Hydrocarbon, Oven Heated Analyzer Model 20/2 Dual Channel Total Hydrocarbon, Oven Heated Analyzer Model 200 Methane/NonMethane/Total Hydrocarbon, Oven Heated Analyzer(NMHC) Model 200/1 Methane/NonMethane, Oven Heated Analyzer(NMHC) Model 210 Methane/Ethane/NonMethane-Ethane/Total Hydrocarbon, Heated Analyzer(NMEHC) Model 300 Single Gas NDIR Analyzer Model 300/2 Dual Gas NDIR Analyzer

Number of Analyzers
Analyzer Only?Yes No
Complete System? Yes No
Voltage Output (Standard) 0-1VDC0-5VDC 0-10VDC
4-20mA Output YesNo
RS-232 Interface YesNo
Automatic Calibration Yes No
Range Identification Relays Yes No
Second Concentration Level Alarm YesNo
Combustion Air Supply No Internal External
Dilution System YesNo
Heated Sample Line With Temperature Controller YesNo
Strip Chart Recorder YesNo
Data Logger YesNo
Calibration Gasses and Regulators YesNo

Special Needs, Comments, or Concerns